add wishlist add wishlist show wishlist add compare add compare show compare preloader
  • phone +1 (929) 293-2322
  • electro-marker-icon Store Location
  • Currencies
    • USD
    L/A
Ethicon ECHELON Circular CDH29P vs Medtronic EEA TRIEEAXL28XT: Key Differences

Ethicon ECHELON Circular CDH29P vs Medtronic EEA TRIEEAXL28XT: Key Differences

Circular staplers are available in different diameters, shaft lengths, and staple configurations. For healthcare procurement teams, identifying the exact manufacturer reference is essential when comparing devices or sourcing replacement inventory.

Two product references that buyers may encounter are the Ethicon ECHELON CIRCULAR CDH29P and the Medtronic EEA TRIEEAXL28XT. Both belong to the circular stapler category, but they have different specifications and configurations.

This guide compares their published product characteristics to help purchasing teams identify the differences and verify the correct product reference before ordering.

1. CDH29P vs TRIEEAXL28XT: Quick Comparison

Specification Ethicon CDH29P Medtronic TRIEEAXL28XT
Manufacturer Ethicon / Johnson & Johnson Medtronic / Covidien
Product family ECHELON CIRCULAR EEA Circular Stapler
Product type Powered circular stapler Circular stapler with Tri-Staple technology
Reference number CDH29P TRIEEAXL28XT
Lumen diameter 29 mm 28 mm
Shaft length 24 cm 35 cm XL
Staple technology Gripping Surface Technology + 3D Staples Tri-Staple technology
Staple rows 2 3
Published staple specifications 5.2 mm open staple leg length; 1.5–2.2 mm closed staple height 4.0 mm, 4.5 mm and 5.0 mm open staple heights
Configuration Powered, adjustable staple height Black, Extra Thick XL configuration

Specifications are based on manufacturer documentation. Staple-height measurements use different manufacturer-defined reference points and should not be compared as identical measurements.

2. Ethicon ECHELON CIRCULAR CDH29P

The CDH29P is part of Ethicon's ECHELON CIRCULAR Powered Stapler portfolio. It features Gripping Surface Technology (GST) and 3D Staples.

According to Ethicon's published specifications, the CDH29P has a 29 mm lumen diameter and a two-row staple configuration. Its device technology is powered with adjustable staple height.

Key specifications

  • Manufacturer: Ethicon

  • Reference: CDH29P

  • Product family: ECHELON CIRCULAR

  • Lumen diameter: 29 mm

  • Shaft length: 24 cm

  • Staple rows: 2

  • Open staple leg length: 5.2 mm

  • Closed staple height: 1.5–2.2 mm

  • Staple technology: GST + 3D

  • Manufacturer-listed quantity: 3 per box

Product listing: Ethicon ECHELON Circular Stapler CDH29P

Buyers should verify the exact reference, packaging, product condition, and expiration details against the current product listing and manufacturer documentation.

3. Medtronic EEA TRIEEAXL28XT

The TRIEEAXL28XT belongs to Medtronic's EEA Circular Stapler portfolio featuring Tri-Staple technology.

This specific reference is the black, Extra Thick XL configuration. Manufacturer documentation identifies a 28 mm lumen size and three rows of varied-height staples. The published staple-height sequence is 4.0 mm, 4.5 mm, and 5.0 mm.

The XL designation identifies the extended-length configuration. Medtronic's regional product specifications list a 35 cm shaft for this model.

Key specifications

  • Manufacturer: Medtronic / Covidien

  • Reference: TRIEEAXL28XT

  • Product family: EEA Circular Stapler

  • Lumen diameter: 28 mm

  • Shaft length: 35 cm XL

  • Staple rows: 3

  • Staple technology: Tri-Staple

  • Color code: Black

  • Tissue classification: Extra Thick (XT)

  • Published open staple heights: 4.0 mm, 4.5 mm, and 5.0 mm

  • Manufacturer-listed quantity: 3 per box

Product listing: Medtronic EEA Black Circular Stapler TRIEEAXL28XT

The exact model and shaft configuration should always be checked against the product label and applicable Instructions for Use.

4. Key Differences Between CDH29P and TRIEEAXL28XT

A. Lumen diameter

The CDH29P has a published lumen diameter of 29 mm, while the TRIEEAXL28XT has a 28 mm lumen size.

Although these nominal sizes are close, the devices should not be treated as identical. Buyers should confirm the exact manufacturer reference and device dimensions rather than relying on the difference being only 1 mm.

B. Shaft length and configuration

One of the clearest differences is the shaft length.

  • CDH29P: 24 cm shaft.

  • TRIEEAXL28XT: 35 cm XL shaft.

The TRIEEAXL28XT is specifically an extended-length configuration. The distinction matters when checking the exact device configuration required by a purchasing specification.

C. Staple technology

The two devices use different manufacturer technologies.

Ethicon CDH29P

  • Gripping Surface Technology.

  • 3D Staples.

  • Powered device technology.

  • Two-row staple configuration.

Medtronic TRIEEAXL28XT

  • Tri-Staple technology.

  • Three rows of varied-height staples.

  • Black Extra Thick XL configuration.

  • Three published staple heights: 4.0 mm, 4.5 mm, and 5.0 mm.

These are different design configurations, not interchangeable specifications.

D. Staple-height specifications

Ethicon publishes a closed staple height range of 1.5–2.2 mm for its ECHELON CIRCULAR Powered Stapler portfolio.

Medtronic publishes open staple heights of 4.0 mm, 4.5 mm, and 5.0 mm for the TRIEEAXL28XT.

These figures describe different measurement references. They should not be compared directly to determine clinical suitability or device equivalence.

5. Important Product Identification Checks

Before sourcing either product, purchasing teams should verify the following information:

  1. Manufacturer reference: Confirm CDH29P or TRIEEAXL28XT from the original product label.

  2. Lumen size: Check the specified 29 mm or 28 mm configuration.

  3. Shaft length: Distinguish the standard-length CDH29P from the extended-length TRIEEAXL28XT.

  4. Staple configuration: Confirm the relevant manufacturer technology and staple-row specifications.

  5. Tissue classification: Check the exact model's documented product configuration, including the Extra Thick designation where applicable.

  6. Packaging quantity: Confirm whether the listing is sold as a single device or an outer box quantity.

  7. Condition and expiration: Verify packaging integrity, sterility information, lot details, and expiration date.

  8. Manufacturer documentation: Consult the current regional IFU and applicable product documentation.

Are CDH29P and TRIEEAXL28XT interchangeable?

They should not be assumed to be interchangeable. The devices have different lumen sizes, shaft lengths, staple technologies, and staple-row configurations.

A product comparison or size reference does not establish clinical equivalence. Always follow manufacturer instructions and institutional procurement requirements.

6. Where to Find These Circular Staplers

BKMedStore lists both references for healthcare procurement enquiries:

Explore additional products in the Staplers, Sealers and Cutters collection.

BKMedStore is based in Brooklyn, New York, and supports healthcare buyers, distributors, and procurement teams. Product availability, condition, expiration information, and shipping options should be confirmed on the individual product listing.

Frequently Asked Questions

1. What is the difference between Ethicon CDH29P and Medtronic TRIEEAXL28XT?

The CDH29P is a 29 mm Ethicon powered circular stapler with GST and 3D Staples. The TRIEEAXL28XT is a 28 mm Medtronic EEA circular stapler with Tri-Staple technology in an Extra Thick XL configuration. They also differ in shaft length and staple-row configuration.

2. What does CDH29P stand for?

CDH29P is the manufacturer reference for the Ethicon ECHELON CIRCULAR Powered Stapler in the 29 mm configuration.

3. What does TRIEEAXL28XT mean?

TRIEEAXL28XT is the product reference for a Medtronic EEA Black Circular Stapler with Tri-Staple technology, 28 mm lumen size, and an Extra Thick XL configuration.

4. What is the shaft length of TRIEEAXL28XT?

Medtronic's regional product specifications list a 35 cm shaft for the TRIEEAXL28XT XL configuration.

5. How many staple rows does the CDH29P have?

Ethicon's published specifications list two staple rows for the ECHELON CIRCULAR Powered Stapler portfolio.

6. How many staple rows does the Medtronic EEA Tri-Staple stapler have?

Medtronic describes its EEA Circular Stapler with Tri-Staple technology as delivering three rows of varied-height staples.

7. Where can buyers find CDH29P and TRIEEAXL28XT?

Both product references are listed on BKMedStore. Buyers can review the individual product pages for current availability, product details, and shipping information.